The 5w solar wall light used by general households and enterprises and institutions almost all use ordinary power supply. In the era of energy shortage, it is necessary to realize the function of lighting and respond to the trend of energy saving and environmental protection. LED lamps were born with high brightness. , Low energy consumption, long life and other characteristics. The new type of 5w solar wall light is mainly to solve the shortcomings of the existing technology, so as to develop a solar wall light. The new type of the above-mentioned technical problems is mainly solved by the following technical solutions. The solar wall lamp is characterized by having a lamp body and a chassis base installed perpendicularly to the lamp body; the lamp body includes a lamp body installed between the bottom plate and the upper cap. A power supply system and a cover; the power supply system includes a solar panel installed under the upper cap, an LED, a rechargeable battery, and a circuit board that are electrically connected to the solar panel and installed in the battery base; the cover is sleeved outside the power system, It includes a lampshade and a lampshade fixing sleeve sleeved on the outside of the lampshade; the chassis base includes a supporting tube one connected with the bottom plate, a supporting tube two vertically connected with the supporting tube one, and a chassis connected with the supporting tube two. The new above-mentioned technical solution can be further improved as a preference. The lampshade has a middle cover inside, and the middle cover is equipped with a reflective sheet; the middle cover is connected with the groove shape under the battery base. Preferably, a toggle switch is installed in the battery base, and the toggle switch is electrically connected to the circuit board. Preferably, a sealing ring is installed between the battery base and the solar panel. Preferably, a stainless steel tube is installed around the lampshade fixing sleeve, a lamp housing screw is used between the bottom plate and the upper cap to pass through the stainless steel tube, one end is positioned with a stop plug, and the other end is fixed with a cap screw through the hole on the upper cap . Preferably, the bottom plate and the supporting tube are fixedly connected with a short screw and a hexagonal nut for the inner liner. Preferably, the first support rod and the second support rod are connected by a long screw; the chassis and the second support rod are connected by a long screw through a wall seat lining. The new type is a solar wall light, which uses a new type of solar panel and uses solar energy as electrical energy for lighting. During the day, the solar panel collects sunlight and stores it in the battery; at night, the solar panel stops working and uses the electrical energy stored in the rechargeable battery to light up the light-emitting diode to achieve lighting purpose