LED screens can be seen everywhere in life, such as display screens, broadcast screens, etc., but do you know how to calculate the size of LEDs? Today, let’s take a look at the calculation method of led screen size.

1. Calculation of point spacing

1. Common model and size of each unit board

LED screens are generally made of unit boards. The common models and dimensions (mm) of LED unit boards correspond to the following: Different brands may have slight differences.

2. How is it calculated?

Here are examples of p10 and p16, because they are the most common.

PH16 single unit board size

With the P16 model, the LED dot pitch of the general module is 16 dots long and 8 dots wide, while the dot pitch of p16 is 10mm. So calculate:

Length=16dots×1.6㎝=25.6㎝

Height=8 points×1.6㎝=12.8㎝

PH10 single unit board size

With the P10 model, the LED dot pitch of the general module is 32 dots long and 16 dots wide, while the dot pitch of p10 is 10mm, so calculate:

Length=32dots×1.0㎝=32㎝

Height=16 points×1.0㎝=16㎝;

It is the same as the above data. Generally, there is no need to calculate these, just remember the content of the picture above.