The main installation places of LED high bay lights are large factories and places. Generally speaking, the installation height of 150W LED high bay lights is between 15 and 20 meters. This height has determined the difficulty of its installation. At the same time, LED high bay lights require larger heat dissipation area and better heat conduction function. Therefore, they are much heavier than traditional high bay lights in the form of energy-saving lamps, so they cannot be installed in the same way as before.

The installation of high-power industrial and mining lamps adopts double safety measures of steel pipe and steel wire rope. The steel pipe is the main load-bearing force of the industrial and mining lamp. At the same time, for safety, in order to prevent the aging and fall of the steel pipe and the lamp, steel wire rope protection measures will be added. In this way, even if the steel pipe and the lamp are aging and fall off, the lamp will not fall.

Take the installation of LED high bay lights in factories and places as an example. First, use a galvanized sheet with a width of 5 cm to fix the steel pipe on the steel beam of the factory, and then use the same specification galvanized sheet to fix the lamp on the steel pipe so that it can be Use steel pipes. Finish supporting the weight of the lamp. At the same time, a steel wire rope is used to pass through the LED high bay lamp to fix the iron ring, and the steel wire rope is fixed to the steel beam of the ceiling to form a double safety measure.