Different LED lamps have different installation methods. Although many LED lamps have different names, the installation methods are the same. For example: downlights, ceiling lamps, spotlights, these lamps are roughly installed in the same way, let me introduce the installation of our company's LED downlights and What to pay attention to.

What should be paid attention to when installing LED downlights

1. Check whether the product is in good condition immediately after unpacking the LED downlight. If there is a failure caused by non-man-made or specified requirements in the manual, it can be returned to the retailer or directly returned to the manufacturer for replacement.

2. Cut off the power before installation, make sure the switch is closed to prevent electric shock, after the LED downlight is on, please do not touch the surface of the light. This lamp should be avoided to install in the place of heat source and hot steam, corrosive gas, so as not to affect the life.

3. Before using the LED downlight, please confirm the applicable power supply according to the installed quantity. This product is for indoor use only. When outdoor, please pay attention to waterproof installation and make sure that the installation position can bear 10 times the weight of the product.

4. The LED downlight is driven by a high-voltage (110V/220V) power supply. It is not suitable to work under frequent power-on and power-off conditions, which will affect its life.

5. Please install the LED downlight in a flat place with no vibration, no swing, and no fire hazard. Take care to avoid falling from high altitude, collision with hard objects, and knocking.

6. If it is not used for a long time, the LED downlight should be stored in a cool, dry and clean environment. It is forbidden to store and use it in humid, high temperature or flammable and explosive places.