Integration In the design of outdoor lighting, integration is also a regulation that should be given attention. Outdoor lighting design can integrate some simple functions to improve the use value of outdoor lighting. For example, outdoor lamps can combine simple functions such as insecticide, purifying indoor air, and intelligent security video surveillance systems, and improve the use value of lamps in a real and practical sense.

The daily conversion time period of lighting fixture manufacturers can also be set independently. The on/off frequency is set to 10 times per day. The inductive load can achieve a large load current of 25 A, and some models and specifications can operate 2-3 different loads individually. Contains a display digital clock module, and its own power consumption is less than 5 W. The built-in 1.5 V rechargeable battery and the automatic switch of the relative battery charging power circuit will not harm the timekeeping even if the power is turned off, and it is not easy to lose the set management program. It is suitable for the natural environment of street lights. However, the power switch is often damaged due to storms, fluctuations in operating voltage or excessive load.

Nowadays, there are more and more types of outdoor lamps, and there are relative lamps to install and apply in all situations. Such as outdoor landscape lights, outdoor lighting roads and street lights, international marine lights, emergency lighting, outdoor game entertainment lighting and other engineering lighting fixtures. These lamps are all applied outdoors and will deal with the complex and changing outdoor geographical environment, such as In rainy and snowy days, high temperature and low temperature will cause the standard air pressure in the lamp to fluctuate and change, which will cause the sealing to be ineffective, which will cause water seepage and cause common failures. Therefore, outdoor lamps must consider the internal and external standard air pressure balance and moisture-proof problems. Most of this problem is based on the moisture-proof and breathable parts of the lighting lamp manufacturer (lamp breathable film or lamp waterproof breathable valve).

Lighting fixtures account for 12% of the electricity consumption in our country, and road lighting fixtures also account for 30% of them. Nowadays, every big city has more or less power engineering vacancies and encounters energy-saving and consumption-reducing problems. Work pressure. Therefore, when environmental protection and energy conservation become a major issue related to the sustainable development trend of social development such as lack of power projects, market competitiveness in the sales market, and ecological environment protection, the basic construction and renovation of "smart lighting systems" in new smart cities It has become a necessity for the development of the city. Street lighting, as a major power-consuming planter in big cities, is a key project construction of many energy-saving projects in big cities. Nowadays, most of them choose LED outdoor lamps and street lamps to replace traditional metal halide lamps, or immediately replace solar-powered outdoor lamps and roads. Street lamps and other methods, from the lamp source or lamps renewal and transformation to carry out energy saving.

The construction of urban night scenes has demonstrated the advantages of humanization in the region

The waterproof and breathable parts of the lamp have very good waterproof and antifouling properties, which can prevent water, oil liquid and particles from entering the lampshade, and maintain the bright components; the waterproof and breathable parts of the lamp can ensure very good inhalation and ventilation regulations, and can be quickly balanced The internal and external ground stress of the lampshade prevents the lamp from undertaking the working pressure of fluctuations; the flow rate of the water-separating melt can maintain the dryness of the inner cavity and prevent the condensed water from damaging special effects; the waterproof and gas-permeable parts of the lamp are made of porous materials with high porosity and reasonable Reduce salt crystallization.

The waterproof and breathable parts of outdoor lighting manufacturers can also prevent pollution and isolation, isolate the environmental pollution of fine particles, and avoid the accumulation of dust on internal parts; the waterproof and breathable parts of the lamp can resist high and low temperature test changes, prevent the imbalance of internal and external working pressure, and maintain the interior The parts are constantly running; the waterproof and breathable parts of the lamp have good corrosion resistance and can maintain the original waterproof level of the machinery and equipment for a long time.

In contemporary cities, the management method of outdoor lamps and street lamps is a time-consuming, strenuous and complicated task. Traditional pavement lamps consume a lot of energy, outdoor lamps and street lamps are widely distributed, the total number is large, and the management method is difficult, and staff needs to be assigned. On daily inspections, the difficulty of repairing common faults is very high, which often causes headaches for city managers.

The intelligent management system of the intelligent lighting system can carry out real-time monitoring and analysis, which can increase the service life of lamps by 2 to 4 times, save a lot of lamps, reduce the labor of maintenance workers to replace and replace lamps, and reasonably reduce the operating costs of lighting system software. Outdoor lamps Manufacturers make urban lighting management methods more convenient and cost-effective. The intelligent lighting system intelligent management system only needs to take a computer or mobile phone, and according to the intelligent supervision system software, it can carry out remote control and standardized management of outdoor lamps, roads and street lamps, and real-time monitoring system throughout the day, real-time remote control and collection of all outdoor lamps The temperature, output power, current, working voltage and other related data information of the road and street lamp in operation.

According to the data of my country's travel news, the annual vacation time in my country is close to 1/3, and the time spent on holidays is concentrated at night to a very large level, and the night economy accounts for an increasing percentage of GDP. Along with the development trend of urban infrastructure, the economic activities in the city at night are also prospering, and the construction of urban night scenes has shown the advantages of humanization in the region. The lighting of the garden landscape at night has quietly become a key element to promote the further improvement of the city's night economy. The overall planning and infrastructure construction of the city's night scene have a great effect of increasing the amount of money to promote the economic prosperity of the city.