Because of the solid-state light source, the life of the LED light tube mainly depends on the solid-state LED light source and the driving heat dissipation part. At present, the life of the LED light source has reached more than 100,000 hours. With the continuous development of LED technology and the large-scale popularization of application technology, the driving and In terms of heat dissipation, it has basically reached a relatively ideal state. The lifespan of high-quality LED tubes on the market basically reaches 10,000-50000 hours, which is almost 10-50 times that of fluorescent tubes.　　 Nowadays, more and more people like energy-saving and environmentally friendly home appliances. Today, I will share with you how to install LED light tubes. I hope it can help everyone.　　 First of all, buy the LED light tube holder and the matching light pipe (the old kind of light pipe cannot be used on the LED light pipe holder). The second step is to open the LED light tube holder box (the holder has a slot and a cover, just open that cover), and at the same time, put the crystal folding heads on both sides of the holder upright. The third step is to remove the live and neutral wires from the LED. Go through the hole in the middle of the light pipe bracket slot, and then fix the bracket with screws. The fourth step is to connect the live wire and the neutral wire, connect the live wire to the L interface, connect the neutral wire to the N interface, press the button at the L or N interface, and then insert the live wire or the neutral wire into the interface, and then Panasonic That's it.　　 The fifth step, after connecting the live wire and the neutral wire, first check whether the connection is correct and the wires are tightened. After checking, cover the removed cover to the bracket slot.　　 Behind, insert the electrodes on both sides of the LED light tube into the crystal folding head, then rotate it at a certain angle to fix it, then turn on the power to see if the light tube is on.