1. Power:

The specific power parameters of our high-power LED wall washer are 10W, 12W, 14.4W, 18W, 24W and other parameters. According to the number of lamp beads: 36 beads, 48 beads, 60 beads, 72 beads, 96 beads, etc. Generally, high-power LED wall washers refer to single row, and 96 beads are double rows. In addition, because of the heat dissipation problem, it is best to use an aluminum plate, and the outer shell is made of aluminum alloy. Otherwise, poor heat dissipation will cause serious light decay.

2. Voltage:

The input voltage of our lighting wall washer is DC 24V. Generally, the built-in power supply is externally connected to AC220V. If it is external, it is generally low-voltage DC24V, DC12V. According to different requirements and different manufacturers, the voltage is also different.

3. IP protection level:

The protection level of our high-power LED wall washer can reach IP65, 6 means: completely prevent dust from entering, 5 means: flush with water without any harm.

4. Color specifications:

There are several types of colorful internal control, full-color external control, single-color external control and single-color constant light.

5. Color temperature:

The color temperatures of several monochromatic colors commonly used in our lighting are: golden light at around 1800-2000K, warm white light at 2800-3000K, neutral light at 4000-4500K, positive white light at 6000-6500K, and cold white light above 7000K.

6. Light-emitting angle:

The light source of the high-power LED wall washer uses 5050, 5630 and other SMD lamp beads, the farthest effective projection distance is 5 meters, and the light-emitting angle is 120 degrees.

7. Mirror:

The glass reflective lens has a light transmittance of 98-98%, is not easy to atomize, and can resist UV radiation.

8.Lens:

Our lighting high-power LED wall washer lens is divided into: 30 degrees, 60 degrees, 90 degrees, the less the angle, the better the light-gathering effect.