Ten advantages of LED tubes: Environmentally-friendly lamps and traditional fluorescent tubes contain a large amount of mercury vapor. If they are broken, the mercury vapor will volatilize into the atmosphere and cause pollution. However, LED tubes do not use mercury at all, and LED products do not contain harmful substances such as lead, and the outer shell can be recycled, which has no destructive effect on the environment. LED tubes are recognized as the green lighting of the 21st century. Rich colors Make full use of the rich colors of LEDs to make lights of various luminous colors. Less heat. Traditional lamps use tungsten filaments to emit light, which will generate a lot of heat. LED lamps have a luminous efficiency of 140LM/W and a high light conversion rate. The surface temperature of the product is below 60℃ and does not produce ultraviolet rays. It is also suitable for documents and clothing. No fading phenomenon occurs. Good versatility The appearance and size of LED tubes are the same as traditional fluorescent lamps, which can replace traditional lamps. No noise LED lamps will not produce noise, which is the best choice for occasions where precision electronic instruments are used. Suitable for occasions such as libraries and offices. Wide voltage range The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and cannot be lit when the voltage drops. The LED lamps can be lit within a certain range of voltage (such as AC 85-265V) to protect the eyes. Traditional fluorescent lamps use alternating current, so 100-120 stroboscopic times per second will be produced. The LED tube uses LED constant current to work, which directly converts AC power to DC power, which effectively reduces LED light decay, starts fast, does not flicker, and protects the eyes. Mosquito-free LED tube does not produce ultraviolet light, infrared light and other radiation, does not contain harmful substances such as mercury, and generates less heat. Therefore, unlike traditional lamps, there are many mosquitoes surrounding the lamp source. The interior will become cleaner, sanitary and tidy. Long power-saving life. The power consumption of LED tubes is less than one-third of that of traditional fluorescent lamps, and their lifespan is 10 times that of traditional fluorescent lamps. The brightness is basically the same as that of traditional fluorescent lamps. The normal service life is more than 30,000 hours and the power saving is as high as 70%. The above can be used for a long time without replacement, reducing labor costs, and more suitable for occasions that are difficult to replace. Sturdy and reliable The LED lamp body itself uses epoxy resin instead of traditional glass, which is more sturdy and reliable. Even if it is hit on the floor, the LED will not be easily damaged and can be used with confidence.