What should I do if water enters the outdoor led display? Summer is an unpredictable season, with strong winds, heavy rains, high temperatures...For the squally windy season, we must do anti-fixing work for outdoor LED displays, and for high-temperature environments, we must take cooling measures. What should we do to deal with the erosion of heavy rain and water ingress into the outdoor LED display? Let’s look at it below:

  1. Preventive work. Although the article mainly talks about the treatment of water ingress of outdoor LED displays, we still need to remind you to do a good job of prevention, choose a good outdoor led display manufacturer, and choose a good led display product. In addition, Also carry out fine waterproofing work when hemming;

  2. Pay attention to the use environment, turn off the screen during heavy rain, and suspend use;

  3. After the rain stops, check whether there is water leakage from the back of the screen. If so, do not power on, and use other tools such as fans to dry the water in the LED display as soon as possible;

  4. Aging the blow-dried outdoor led display screen:

  (1) Adjust the brightness (full white) to 10%, and aging for 8-12 hours after power on.

  (2) Adjust the brightness (full white) to 30%, aging for 12 hours after electrifying.

  (3) Adjust the brightness (full white) to 60%, and aging for 12-24 hours after power on.

  (4) Adjust the brightness (full white) to 80%, aging for 12-24 hours after power on.

  (5) Adjust the brightness (full white) to 100%, and aging for 8-12 hours after power on.

  Do the above work, and the water ingress problem of outdoor led display is almost solved. In this case, you can check the outdoor led display module, power supply, control card, wire and other problems. If you need to repair it, please do the maintenance work.