Garden landscape lighting design skills

　　The object of garden lighting is different from indoor lighting and architectural environment lighting. Its main purpose is  enhance the effect of scenery and create a night landscape. Therefore, in terms of the type of light source, a light source with better direction and control ability should be selected as much as possible, and the use of ordinary floodlighting lamps should be reduced.

　　The lighting requirements of different positions in the garden are quite different. In order  show the beautiful shapes of the buildings, sculptures, flowers, trees, mountains and rocks in the garden, the lighting method should be different from the scene, and the projection light should also be used according  the needs. The strength is changed  show their respective charms at night; the street lights on both sides of the park road should have uniform and continuous illumination  meet the needs of safety.

　　In order  make the small space appear bigger, you can only illuminate the necessary part and put the rest in the shadow; for the large outdoor space, the treatment method is the opposite, which will make the large space feel a kind of intimacy.

　　Outdoor lighting should use the dimmer on the light source carefully. In most garden lights that use incandescent lamps as the light source, the use of dimmers will make the light yellowish and cast a layer of yellow on the illuminated objects. Especially for plants, it will show a morbid state and lose the original vitality.

　　It is also best  use color filters or color LEDs sparingly, because the light projected by them will produce a sense of disrtion, which will cause some kind of unreality  plants. Of course, the sky blue filter is an exception. It can eliminate the yellow tint in the incandescent lamp and turn the light in a pleasant blue-white light. A small filter or other accessories can make a huge change in the entire landscape, which requires constant attention in the design.

　　The brightness of the light should be determined according  the needs of the activity and  ensure safety. o bright or o dark will cause discomfort  visirs, and the lighting design should pay special attention  glare. Hiding the lamps in the flowers and trees can provide the necessary lighting without causing glare.

　　determine the lighting range of the light, it is necessary  consider the position of the luminaire, that is, the height, angle and light distribution of the luminaire. The size, brightness and darkness of the shadow formed during lighting must be coordinated with the environment and atmosphere, so as  facilitate the use of light and shadow  set off the nature and create a certain The scene and atmosphere. All of these should be carefully observed in the surrounding space during the day, and through calculation and adjustment  determine the best landscape lighting effect.

　　The following introduces several common scenery lighting:

　　Floodlighting of trees

　　1. Floodlights are generally placed on the ground, and the arrangement method is determined according  the type and appearance of the trees;

　　2. If you want  illuminate a higher position on the tree, you can place a metal pole with the same height as the irradiation position beside the tree  install the lamp;

　　3. On the main branches of deciduous trees, install a string of low-power incandescent bulbs or LED lamp beads  obtain a decorative effect;

　　4. For the floodlights that must be installed on trees, the installation ring tied  the branches of the tree must be able  adjust according  the growth law of the plant;

　　5. The lighting of trees must be artistic.

　　Illumination of flower beds

　　1. For flower beds on the ground level, the so-called magic valley type lamps are used  illuminate downwards. The lamps are often placed in the center or edge of the flower beds. The height of the lamps depends on the height of the flowers;

　　2. Commonly used light sources include incandescent lamps, compact fluorescent lamps, metal halide lamps and LED light sources, using light sources with a relatively high color rendering index.

　　Decorative lighting of statues

　　1. The number and arrangement of lighting points depend on the type of target  be illuminated;

　　2. Determine the location of the luminaire according  the location of the illuminated target and its surrounding environment:

　　a. For lighting targets located in the center of grass or open space in isolation, the lamps should be as flush as possible with the ground  maintain the surrounding appearance;

　　b. If the lighting target is located in the center of the grass or open space in isolation, if it is located on the base, the lamp should be placed in a far place  avoid shadows on the botm of the illuminated target due  the occlusion of the base;

　　c. If the target located on the base is close  pedestrians, the lamp should be fixed on the public lighting pole or on the facade of the nearby building.

　　3. For statues, always phograph the subject of the face and the front of the image. When choosing the direction of illumination, avoid shadows on the statue's face;

　　4. For some sculptures, the color of the light should be coordinated with the color of the sculpture material.

　　Waterscape lighting

　　1. Lighting of still waters and lakes: lamps can illuminate the scene on the shore and can form reflections on the water; objects on the opposite shore can be illuminated by floodlights immersed in the water; for dynamic water surfaces, floodlights can be used  directly illuminate the water surface ；

　　2. Illumination of the fountain: In the case of water jets, install the floodlights behind the spout in the pool or below the drop point in the pool when the water flows again, or install lights in both places. The three primary colors of red, blue and yellow are often used, followed by green;

　　3. Lighting for waterfalls: For water flows and waterfalls, the lamps should be installed at the botm of where the water flows.

　　Shenzhen  Lighting is a lamp manufacturer focusing on R&D and production of LED landscape lighting and outdoor lighting. It has 9 years of experience in military industry lighting services. It is located in Shenzhen Baoan. Its products cover: stadium lighting, LED sports lighting, stadium lights, LED stadium lights, High bay lights, high bay lights manufacturers, LED workshop lights, workshop LED lights, tunnel LED lights, LED tunnel lights, LED wer chandeliers, street lights, LED workshop lights, LED squares, lamps, LED lights, high pole lights, wer chandelier, LED Street lights, LED lamps, LED high pole lights, etc. For many years, our company has always put product quality in the first place. At present, the company has passed the ISO9001 international quality certification system, and the products have passed CE, ROHS, 3C and other domestic and international certifications and inspections. We insist on making cusmers feel free  buy and use LED lights. Philosophy and mission,  Lighting [Chongde Shangshan is the source of the original] look forward  cooperating with you for a win-win situation!