Generally speaking, you need to know how high the security lights with motion sensor is, how big the lamp holder is, and secondly, you need to know the duration of continuous lighting and the number of consecutive cloudy and rainy days, so that you can accurately configure a reasonable solar panel and battery capacity. Cause insufficient battery life or waste of resources.

Now what we do are basically street lights for new rural construction, usually 6M30W lamp holders, 90W solar panels, and 30AH lithium batteries. This configuration can be applied to many areas. It can be adjusted appropriately for special areas. But the margin will not be too great. We have always maintained quality and quantity for the products, so we will not do for those low-priced quotations, because low prices have no meaning for our factory and are thankless, so we hope that our Enterprises can grow bigger and stronger in the long run and develop continuously.

Common light sources and characteristics of security lights with motion sensor

Ordinary fluorescent lamps provide more green light, about 50%, and the rest are mostly red and blue light, which respectively account for about 25% of the total spectrum. The proportion of far red spectrum is very low. Fluorescent lamps have high luminous efficiency and long life (about 12000h), but their power is low (28W and 36W are commonly used at present), and more lamps are needed to meet a certain illuminance. Because it contains a lot of green light, it is easy to cause crop growth. Currently commonly used in plant tissue culture.

　　 Sodium lamp is a gas luminous light source that emits mercury and sodium vapor. It is divided into low pressure sodium lamp and high pressure sodium lamp. The low pressure sodium lamp appeared earlier, the sodium vapor pressure is not more than a few Pa, and its emission spectrum is concentrated in the yellow light of 589nm, usually only in conjunction with other light sources. The luminous efficiency is as high as 200lm/W, and the lifetime is long (about 9000h). The standard working sodium vapor pressure of the high-pressure sodium lamp is about 10kPa, and there are more red-orange light and less blue-green light in the emission spectrum. The luminous efficiency is high, the power is large, and the life is long (about 12000h), and it is currently used more. However, because the high-pressure sodium lamp is a heat source, the surface temperature is high, and the heat is large, so it cannot irradiate crops at close range.

　 The metal halide lamp is a gas luminous light source in which the mixed vapor of mercury and rare metal halide generates an electric arc and discharges light. Different spectra can be presented by changing the composition of the metal halide. It has high luminous efficiency, high power and long life (5000h~20000h). However, there is mercury in the filling of the lamp, which will pollute the environment when the used lamp is broken or discarded after failure. The spectrum contains more far-red light, which generates a large amount of heat and cannot irradiate crops at close range.