Facry lights are generally used in workshops, processing workshops, warehouses, large-scale machine ols, etc. Facry lights are also called high bay lights, which are composed of light sources, lampshades and lamp holders. The lampshade can be used as a lamp controller  change the light distribution curve and the light suburb according  different materials and sizes.

　　According  the shape of the light distribution curve, the facry lights can be divided in five types: wide illumination type, uniform light distribution type, distribution type, deep illumination type, and super deep illumination type. The deep illumination type and the super deep illumination type are used outside the tall and large facry buildings (above 6 meters), and the wide illumination type, uniform light distribution type, and illumination type can be used for general lighting (below 6 meters).

　　1. Experience in installing LED facry lights

　　1. Ensure that the LED facry lights are good when they receive the goods. When receiving the LED facry lights, try  check whether they are damaged or not.

　　2. After the LED facry lights arrive on the construction site  prepare for installation, you should organize the installers according  the installation drawings attached by the LED facry lights manufacturers, and first connect a few LED facry lights  try if the installation drawings are correct. If possible, you can arrange one People try  light them one by one,  avoid damage after installation, and then  be dismantled.

　　3. Remind the installation workers of the importance of fixing and wiring, especially the waterproof outdoor wiring is very important, it is best  review it when fixing and wiring.

　　4. After the LED facry lights are fixed and connected, when you are ready  test light, it is best  use a universal meter on the main power supply  check whether the LED facry lights are connected  the wrong wire or short-circuited.

　　5. After all the test lights are done, try  light up for as long as possible, and recheck the next day and the third day. After doing this, everything is good, and there will generally be no problems later.

　　2. Wiring method of LED facry lights

　　LED facry lights usually come out with three wires, the blue wire and the brown wire are connected  the live wire and the zero wire, regardless of the positive and negative poles, and there is a yellow wire with a green in the middle. The term is yellow green. The ground wire can be left empty if there is no ground wire coming.

　　Compared with traditional high bay lights, LED facry lights have a longer lifespan and more stable performance, low maintenance and replacement frequency after use, and easy and convenient installation and wiring of lights. As long as we pay attention  it, we can easily get it.

　　As a lighting manufacturer with eight years of military quality service experience, Shenzhen  Lighting specializes in the development and production of LED facry lights. The existing Zunyao series and interstellar series of facry lights are sold throughout the country. If you have any questions about the installation of lamps, Feel free  contact us, we will serve you wholeheartedly.