What is the potential of linear lighting in industrial and office spaces?

　　The lighting industry has a small reshuffle in one year and a major reshuffle in five years. At present, the insurance level of market development is generally three years. After three years, there will be a reshuffle. Before talking about linear lighting, let's define it first.

　　Broadly speaking, linear lighting fixtures are linear lighting fixtures, as far as the various T12/T8/T5 brackets, pendant lights, high bay lights in the fluorescent lamp era,  the exquisite LED rigid light strips in the LED era day, Wall washer linear lighting, linear LED high bay lights, linear office lamps, etc.

　　But we can't talk about such a general pic day, let's have a subdivided pic! Let's briefly talk about the prospects and trends of linear lighting fixtures in industrial lighting and office retail lighting, hoping  have an effect. If we are really lucky enough  give our colleagues in the lighting industry market planning and technology development in the future A little bit of enlightenment, that is a happier thing.

　　Trends in industrial lighting

　　Let’s talk about the small trends and trends of industrial lighting. Everyone knows that ten years ago, most of our market products were large cannon-tube high bay lights with metal halide lamps, with square or round metal boxes on the p (better industrial The die-cast aluminum fin type electrical box is a patented work of a certain master), and a large 18-inch spinning aluminum reflecr is hung below the card. The initial shape of the LED high bay light is the same as the metal halide lamp, but it is changed. light source. Then I think it can be regarded as the age of UFO industrial and mining lamps. This UFO is also a miracle, and it became popular. I can't find the source of the original.

　　▲UFO high bay light

　　However, this UFO still hasn't gotten rid of the shadow of traditional industrial and mining lighting. The shortcomings of the application and the lack of light applications still make it slowly decline. UFO is still not acceptable in many occasions, especially in a large number of warehouse lighting and low- and medium-space industrial and mining lamps. At this time, LED linear industrial lamps are slowly squeezed in with their slender body and flexible application, with professional optics. The applied linear lighting is slowly coming  the forefront of Frankfurt exhibition and European lighting applications.

　　▲The application of linear lamps in warehouses

　　▲General warehouse lighting case

　　For large space areas such as open warehouses, lighting is required  pay attention  illuminance, uniformity and energy saving. In this scene, choose 30°, 60°, 90°, 120° and other targeted circular symmetrical light distribution according  the height. Linear lighting fixtures will be the best solution.

　　Then if you encounter this kind of shelf-type warehouse space, the scene lighting design should be different.

　　Elliptical long strip light distribution lamps will be the best choice. Compared  round light distribution lamps, using oval light distribution in this scenario, the power requirements of the lamps will be reduced by at least 30%, and this kind of warehouse generally has a very long lighting time every day. Long, the electricity cost saved every day will be a large amount, and the cost of the lamps can be saved in less than two years. Therefore, it is particularly advantageous for energy-saving renovation projects and PPP projects. After all, the savings are earned .

　　▲DIALux simulation lighting effect picture (click  enlarge)

　　Compared with the application and development of such lighting in industrial warehouses and supermarkets, it is necessary  grasp the effective utilization of light and meet the required lighting uniformity and illuminance. Then we will talk about modern office lighting linear lamps. Higher requirements and key points than the above-mentioned lighting. Compared with industrial lighting, the lighting time of office lighting will not be short every day, but the effective utilization of light, light quality and glare requirements are relatively high and not a little bit. But precisely because the requirements are high, and it is also a workplace for various bosses and management employees, the prospects and potential are greater.

　　▲ DIALux simulation lighting effect diagram

　　Office lighting market demand is huge

　　The following is a research report (part of) on the core trends of China's office demand released by the world's leading real estate service provider DTZ:

　　▲Core indicars of demand in China's six major cities-Grade A office buildings (Q2 2017)

　　According  the analysis of DTZ, we can see that the demand for Grade A office buildings in the six key cities has increased by at least 23.9% from 2015  the same period in 2016, or even almost tripled. The increase in demand means supply. Significant increase in volume.

　　▲ my country's office building area trend chart from 2005  2015 (unit: ten thousand square meters)

　　It can be seen from the above chart that the area of ??office buildings in China has increased dramatically from more than 11 million square meters  nearly 30 million square meters in just ten years from 2005  2015. The demand for social development has caused China's super high-rise Grade A office buildings  spring up like mushrooms, time and time again. Refresh the height and number of super high-rise buildings. Among them, China accounts for seven of the world’s p ten high-rise buildings. The 729-meter Suzhou Zhongnan Center under construction, the Tianjin 117 Building, the 632-meter-high Shanghai wer, and the 599-meter-high Shenzhen The Ping An Financial Center, the 590-meter Guangzhou Chow Tai Fook Financial Center, etc., are constantly entering our market. The face of thousands of super high-rise Grade A office buildings also means that the lighting industry will be in this segment of the field. Bringing a lot of business opportunities and needs, in the face of this attractive cake, what products and concepts should our lighting companies and design colleagues use  meet the new era needs of these local tyrant gold projects?

　　This pic reminds me of my new recruits a dozen years ago. When I was working on projects such as Guangzhou Zhujiang New City KJT, R&F Center, etc., holding our fluorescent tube grille lamp panel, and Xiao Fei And a certain brand in Hong Kong, compared the thickness of the lamp panel steel plate, the reflectivity of the reflecr and whether the electronic rectifier was preheated or instantaneously started. From the first floor  climb the stairs  the model floor of the building for more than ten floors  install lights, debug, and watch Stroboscopic, measure the illuminance and uniformity bit by bit with an illuminance meter.

　　The current lighting market has completely entered the LED lighting era. When we now encounter this type of Grade A office building projects or more high-end super Grade A office buildings, what kind of design and products should we have? The fluorescent tube grille lamp panel is out, choose LED tube instead of fluorescent lamp grille lamp panel? Or panel light? Or what other new products? In fact, they can no longer meet the needs of reality.

　　Let's tentatively divide our needs for lighting in an era of food and clothing, a well-off society, and a rich and harmonious socialist society.

　　The age of food and clothing: there is light, there is hope;

　　Well-off society: the lighting needs  meet the requirements of the national standard, the illuminance cannot be less than how much lx, and the uniformity must be greater than how much;

　　Socialist affluent and harmonious society: No money is needed, but good light is needed.

　　Last year, I was invited by a friend and driven by feelings  help others develop a series of linear lamps and lanterns. We tried our best  take in account the various application technology trends and product market characteristics of office lighting and industrial warehouse supermarkets. At that time, the main Analyzed from the following perspectives.